#83 楼 @huhutouch 兄弟认识一下 QQ 发我邮箱。cw35010@ly.com

#5 楼 @lihuazhang 大神 你遇到我上面出现的问题吗

#78 楼 @jackelchen 不对是 QQ

#78 楼 @jackelchen 兄弟把你邮箱发到我这个邮箱里吧 邮箱:cw35010@ly.com

#78 楼 @jackelchen 可以加个好友吗。

#75 楼 @doctorq 可以看下我 update shaping 的 log
startShaping TrafficControl(device=TrafficControlledDevice(controllingIP='192.168.0.2', controlledIP='192.168.0.2'), timeout=86400, settings=TrafficControlSetting(down=Shaping(loss=Loss(percentage=0.0, correlation=0.0), delay=Delay(delay=350, jitter=0, correlation=0.0), rate=250, iptables_options=[], corruption=Corruption(percentage=0.0, correlation=0.0), reorder=Reorder(percentage=0.0, correlation=0.0, gap=0)), up=Shaping(loss=Loss(percentage=0.0, correlation=0.0), delay=Delay(delay=370, jitter=0, correlation=0.0), rate=200, iptables_options=[], corruption=Corruption(percentage=0.0, correlation=0.0), reorder=Reorder(percentage=0.0, correlation=0.0, gap=0))))
INFO:AtcdVService.AtcdLinuxShaper:Shaping ip 192.168.0.2 on interface eth0
INFO:AtcdVService.AtcdLinuxShaper:create new HTB class on IFID eth0, classid 1:3,parent 1:0, rate 200kbits
INFO:AtcdVService.AtcdLinuxShaper:create new Netem qdisc on IFID eth0, parent 1:3, loss 0.0%, delay 370000
INFO:AtcdVService.AtcdLinuxShaper:create new FW filter on IFID eth0, classid 1:3, handle 3, rate: 200kbits
INFO:AtcdVService.AtcdLinuxShaper:Running /sbin/iptables -t mangle -A FORWARD -d 192.168.0.2 -i eth0 -j MARK --set-mark 3
INFO:AtcdVService.AtcdLinuxShaper:Shaping ip 192.168.0.2 on interface wlan0
INFO:AtcdVService.AtcdLinuxShaper:create new HTB class on IFID wlan0, classid 1:3,parent 1:0, rate 250kbits
INFO:AtcdVService.AtcdLinuxShaper:create new Netem qdisc on IFID wlan0, parent 1:3, loss 0.0%, delay 350000
INFO:AtcdVService.AtcdLinuxShaper:create new FW filter on IFID wlan0, classid 1:3, handle 3, rate: 250kbits
INFO:AtcdVService.AtcdLinuxShaper:Running /sbin/iptables -t mangle -A FORWARD -s 192.168.0.2 -i wlan0 -j MARK --set-mark 3
INFO:AtcdVService.AtcdLinuxShaper:Unshaping ip 192.168.0.2 on interface eth0
INFO:AtcdVService.AtcdLinuxShaper:Running /sbin/iptables -t mangle -D FORWARD -d 192.168.0.2 -i eth0 -j MARK --set-mark 2
INFO:AtcdVService.AtcdLinuxShaper:deleting filter on IFID eth0, handle 2
INFO:AtcdVService.AtcdLinuxShaper:deleting class on IFID eth0, classid 1:2
INFO:AtcdVService.AtcdLinuxShaper:Unshaping ip 192.168.0.2 on interface wlan0
INFO:AtcdVService.AtcdLinuxShaper:Running /sbin/iptables -t mangle -D FORWARD -s 192.168.0.2 -i wlan0 -j MARK --set-mark 2
INFO:AtcdVService.AtcdLinuxShaper:deleting filter on IFID wlan0, handle 2
INFO:AtcdVService.AtcdLinuxShaper:deleting class on IFID wlan0, classid 1:2
INFO:AtcdVService.AtcdLinuxShaper:Request requestToken(192.168.0.2, 259200)
INFO:AtcdVService.AtcdLinuxShaper:Request requestToken(192.168.0.2, 259200)

#75 楼 @doctorq cable 类型的。我基本都 select 过 都不行

#72 楼 @doctorq 然后 wlan0 转的 eth0

#72 楼 @doctorq 公司的有线网。环境和你一样 macmini 上搭建的 ubuntu14.04. 现在就使用 act 网络就访问不了。

@lihuazhang 请问你 ATC 部署之后，select 相应的网络环境，update shaping. 但是浏览网页卡死状态，根本用不了。WIFI 不用 ATC 是正常的。你遇到过吗

#70 楼 @doctorq

楼主我部署好了 ATC 连上 WiFi 选择相应的 profiles update shape 后 网络特别特别慢，不管选择哪一个 profiles.你遇到过这样的问题吗

#67 楼 @linxizhihe 兄弟我解决了 ，你选的 interface name 是错误的 应该是下面的 wlx5...

#67 楼 @linxizhihe 我问题和你一样 请问你解决了吗。可以教教我吗