基本功能接入

1、如何接入

1.1 v4 版本支持`go 形态`、`json`、`yaml`等多种数据运行，那么接入可以从这几方面入手

go 形态 需要将测试用例转成go代码，实现起来比较麻烦，所以不合适
json、yaml需要将测试用例转成文件，再去执行、收集测试报告，效率比较低，在有其他条件的情况下，尽量不考虑

1.2 考虑直接用代码调用

既然支持json格式，那么是否可以直接将测试用例转成json，然后直接塞入ITestCase中，这时候看稍微看了一下源码，好像也行不通，这时候看一下官方文档，发现一缕曙光，TestSteps：有序步骤的集合；采用了 go interface 的设计理念，支持进行任意协议和测试类型的拓展；步骤内容统一在 Run 方法中进行实现。最后通过这部分go interface的设计理念实现接入

2、接入流程

实现ITestCase，通过源码发现ITestCase接口实现了GetPath、ToTestCase两个方法，那么只需要写一个struct实现GetPath、ToTestCase两个方法就可以
增加id字段，关联至已有的已有数据，方便统计用例运行情况
获取测试报告，v4 报告通类型为Summary，创建一个相同的结构体用来保存测试报告
函数驱动，由于文件读写问题，需要每个用例/任务/接口+id放在一个目录去运行 debugtalk，否则没办法同时运行多个用例/任务/接口,会出现 1 用例直接结束，停止 debugtalk 后导致异常

3、代码实现

func RunCase(apiCaseID request.RunCaseReq) (reports interfacecase.ApiReport, err error) {
    toTestCase := ToTestCase{Config: apiConfig, TestSteps: apiCases.TStep}
    caseJson, _ := json.Marshal(toTestCase)

    tc := &hrp.TestCaseJson{
        JsonString:        string(caseJson),
        ID:                apiCaseID.CaseID,
        DebugTalkFilePath: debugTalkFilePath,
    }
    reports, errs := hrp.NewRunner(t).
    SetHTTPStatOn().
    SetFailfast(false).
    RunJsons(testCase)
    if errs != nil {
        t.Fatalf("run testcase error: %v", err)
    }
    return
}

func tmpls(relativePath, debugTalkFileName string) string {
    return filepath.Join(debugTalkFileName, relativePath)
}

type TestCaseJson struct {
    JsonString        string
    ID                uint
    DebugTalkFilePath string
}

func (testCaseJson *TestCaseJson) GetPath() string {
    return testCaseJson.DebugTalkFilePath
}

func (testCaseJson *TestCaseJson) ToTestCase() (*TestCase, error) {
    tc := &TCase{}
    var err error
    casePath := testCaseJson.JsonString
    tc, err = loadFromString(casePath)
    if err != nil {
        return nil, err
    }

    err = tc.MakeCompat()
    if err != nil {
        return nil, err
    }

    tc.Config.Path = testCaseJson.GetPath()

    testCase := &TestCase{
        ID:     testCaseJson.ID,
        Config: tc.Config,
    }

    projectRootDir, err := GetProjectRootDirPath(testCaseJson.GetPath())
    if err != nil {
        return nil, errors.Wrap(err, "failed to get project root dir")
    }

    // load .env file
    dotEnvPath := filepath.Join(projectRootDir, ".env")
    if builtin.IsFilePathExists(dotEnvPath) {
        envVars := make(map[string]string)
        err = builtin.LoadFile(dotEnvPath, envVars)
        if err != nil {
            return nil, errors.Wrap(err, "failed to load .env file")
        }

        // override testcase config env with variables loaded from .env file
        // priority: .env file > testcase config env
        if testCase.Config.Environs == nil {
            testCase.Config.Environs = make(map[string]string)
        }
        for key, value := range envVars {
            testCase.Config.Environs[key] = value
        }
    }

    for _, step := range tc.TestSteps {
        step.ParntID = step.ID
        step.ID = 0
        if step.API != nil {
            apiPath, ok := step.API.(string)
            if !ok {
                return nil, fmt.Errorf("referenced api path should be string, got %v", step.API)
            }
            path := filepath.Join(projectRootDir, apiPath)
            if !builtin.IsFilePathExists(path) {
                return nil, errors.New("referenced api file not found: " + path)
            }

            refAPI := APIPath(path)
            apiContent, err := refAPI.ToAPI()
            if err != nil {
                return nil, err
            }
            step.API = apiContent

            testCase.TestSteps = append(testCase.TestSteps, &StepAPIWithOptionalArgs{
                step: step,
            })
        } else if step.TestCase != nil {
            casePath, ok := step.TestCase.(string)
            if !ok {
                return nil, fmt.Errorf("referenced testcase path should be string, got %v", step.TestCase)
            }
            path := filepath.Join(projectRootDir, casePath)
            if !builtin.IsFilePathExists(path) {
                return nil, errors.New("referenced testcase file not found: " + path)
            }

            refTestCase := TestCasePath(path)
            tc, err := refTestCase.ToTestCase()
            if err != nil {
                return nil, err
            }
            step.TestCase = tc
            testCase.TestSteps = append(testCase.TestSteps, &StepTestCaseWithOptionalArgs{
                step: step,
            })
        } else if step.ThinkTime != nil {
            testCase.TestSteps = append(testCase.TestSteps, &StepThinkTime{
                step: step,
            })
        } else if step.Request != nil {
            testCase.TestSteps = append(testCase.TestSteps, &StepRequestWithOptionalArgs{
                step: step,
            })
        } else if step.Transaction != nil {
            testCase.TestSteps = append(testCase.TestSteps, &StepTransaction{
                step: step,
            })
        } else if step.Rendezvous != nil {
            testCase.TestSteps = append(testCase.TestSteps, &StepRendezvous{
                step: step,
            })
        } else if step.WebSocket != nil {
            testCase.TestSteps = append(testCase.TestSteps, &StepWebSocket{
                step: step,
            })
        } else {
            log.Warn().Interface("step", step).Msg("[convertTestCase] unexpected step")
        }
    }
    return testCase, nil
}

func loadFromString(jsonString string) (*TCase, error) {
    tc := &TCase{}
    decoder := json.NewDecoder(bytes.NewReader([]byte(jsonString)))
    decoder.UseNumber()
    err := decoder.Decode(tc)
    return tc, err
}

func (r *HRPRunner) RunJsons(testcases ...ITestCase) (interfacecase.ApiReport, error) {
    event := sdk.EventTracking{
        Category: "RunAPITests",
        Action:   "hrp run",
    }
    // report start event
    go func() {
        err := sdk.SendEvent(event)
        if err != nil {

        }
    }()
    // report execution timing event
    defer func(e sdk.IEvent) {
        err := sdk.SendEvent(e)
        if err != nil {

        }
    }(event.StartTiming("execution"))
    // record execution data to summary
    s := newOutSummary()

    // load all testcases
    testCases, err := LoadTestCases(testcases...)
    if err != nil {
        log.Error().Err(err).Msg("run json failed to load testcases")
        return interfacecase.ApiReport{}, err
    }

    // run testcase one by one
    for _, testcase := range testCases {
        sessionRunner, err := r.NewSessionRunner(testcase)
        if err != nil {
            log.Error().Err(err).Msg("[Run] init session runner failed")
            return interfacecase.ApiReport{}, err
        }
        defer func() {
            if sessionRunner.parser.plugin != nil {
                sessionRunner.parser.plugin.Quit()
            }
        }()

        for it := sessionRunner.parametersIterator; it.HasNext(); {
            if err = sessionRunner.Start(it.Next()); err != nil {
                log.Error().Err(err).Msg("[Run] run testcase failed")
                return interfacecase.ApiReport{}, err
            }
            caseSummary := sessionRunner.GetSummary()
            caseSummary.CaseID = testcase.ID
            s.appendCaseSummary(caseSummary)
        }
    }
    s.Time.Duration = time.Since(s.Time.StartAt).Seconds()

    // save summary
    if r.saveTests {
        err := s.genSummary()
        if err != nil {
            return interfacecase.ApiReport{}, err
        }
    }

    // generate HTML report
    if r.genHTMLReport {
        err := s.genHTMLReport()
        if err != nil {
            return interfacecase.ApiReport{}, err
        }
    }
    sj, _ := json.Marshal(s)
    global.GVA_LOG.Debug("测试报告json格式")
    global.GVA_LOG.Debug("\n" + string(sj))
    var reportsStruct interfacecase.ApiReport
    err = json.Unmarshal(sj, &reportsStruct)
    return reportsStruct, nil
}

func BuildHashicorpPyPlugin(debugTalkByte []byte, debugTalkFilePath string) {
    log.Info().Msg("[init] prepare hashicorp python plugin")
    //src, _ := ioutil.ReadFile(tmpls("plugin/debugtalk.py"))
    err := ioutil.WriteFile(tmpls("debugtalk.py", debugTalkFilePath), debugTalkByte, 0o644)
    if err != nil {
        log.Error().Err(err).Msg("copy hashicorp python plugin failed")
        os.Exit(1)
    }
}

func RemoveHashicorpPyPlugin(debugTalkFilePath string) {
    log.Info().Msg("[teardown] remove hashicorp python plugin")
    // on v4.1^, running case will generate .debugtalk_gen.py used by python plugin
    os.Remove(tmpls(PluginPySourceFile, debugTalkFilePath))
    os.Remove(tmpls(PluginPySourceGenFile, debugTalkFilePath))
}

type TStep struct {
    ID            uint                   `json:"ID"`
    ParntID       uint                   `json:"parntID"`
}

type Summary struct {
    CaseID   uint               `json:"caseID"`
}

type TestCase struct {
    ID        uint
}
func (r *SessionRunner) Start(givenVars map[string]interface{}) error {
    stepResult, err := step.Run(r)  // 在这一行下增加下面一行
    stepResult.ParntID = step.Struct().ParntID
}

↙↙↙阅读原文可查看相关链接，并与作者交流

基本功能接入

1、如何接入

1.1 v4 版本支持go 形态、json、yaml等多种数据运行，那么接入可以从这几方面入手

1.2 考虑直接用代码调用

2、接入流程

3、代码实现

1.1 v4 版本支持`go 形态`、`json`、`yaml`等多种数据运行，那么接入可以从这几方面入手